Jinan Tieyi guardrail is fixed by screws. Do you know what points you need to pay attention to when choosing anti-theft screws? Next, follow the iron guardrail manufacturers to understand it below, hope to help you.

有些廠家為了節省成本使用比較劣質的螺絲來組裝鐵藝護欄，這樣必然會造成很大的安.全隱患啊，而且不同的配件需要針對性的使用不同的螺絲。

In order to save cost, some manufacturers use inferior screws to assemble iron guardrail, which will inevitably cause great safety risks. Moreover, different accessories need to use different screws.

鐵藝護欄

Wrought iron guardrail

比如現在市面上使用較多的拉伸料的固定座，這個固定座標準的配備的螺絲是不銹鋼的拉鉚螺絲，拉鉚和管壁固定在一起然后螺桿扭進去，這樣安裝很穩固，強度也是經過國家檢測部門檢測過的。

For example, the fixed seat of drawing material is widely used in the market. The standard screw of the fixed seat is stainless steel riveting screw. The riveting screw is fixed with the pipe wall, and then the screw is twisted in. In this way, the installation is very stable, and the strength has also been tested by the national testing department.

而且因為拉鉚把鉆孔的邊都包裹住了，這樣孔邊也不容易生銹，這樣本來是好的組裝方式，但是現在有些鐵藝護欄廠家為了節省成本使用自攻螺絲固定，自攻螺絲千萬不能用在起主要作用力的地方的，為何這樣說呢，因為鋅鋼管子相對都比較薄，自攻螺絲攻進去也只能考那么薄的管壁來支撐力。

In addition, the riveting covers the edge of the hole, so that the edge of the hole is not easy to rust. This was originally a good way of assembly, but now some iron guardrail manufacturers use self tapping screws to save costs. Self tapping screws must not be used in places where the main force is exerted. Why do we say this? Because zinc steel pipes are relatively thin, The self tapping screw can only test the thin pipe wall to support the force.

自攻螺絲前面小后面大很容易就松動了，松動了很容易脫落，而且自攻螺絲是直接攻入鍍鋅管內會破壞管子的涂層，自攻點很容易生銹。這樣自攻螺絲的強度就更查了，如果收到連續的強作用力，自攻螺絲是承受不了的。

The front of the self tapping screw is small and the back is large, so it is easy to loose and fall off. Moreover, if the self tapping screw is directly penetrated into the galvanized pipe, it will damage the coating of the pipe, and the self tapping point is easy to rust. In this way, the strength of the self tapping screw is more checked. If the continuous strong force is received, the self tapping screw can't bear it.

但是因為自攻螺絲本身便宜，而且安裝快捷方便，給很多的投機取巧的人提供了機會。這個是說的拉伸料固定座使用的螺絲，還有一個圍欄用的三包圍固定件，這個固定件是采用不銹鋼的防拆螺絲，穿插鎖。這樣不管強度好，而且防拆防盜。

But because the self tapping screw itself is cheap, and the installation is fast and convenient, it provides opportunities for many opportunists. This is the screw used for the drawing material fixing seat. There is also a three enclosure fixing part for the fence. The fixing part is made of stainless steel anti disassembly screw and inserted lock. In this way, no matter the strength is good, but also anti-theft.

還有別的一些配件其實我個人建議是不管什么配件要么使用防拆螺絲，要么使用拉鉚螺絲。盡量少用自攻螺絲。這樣強度和使用壽命都可以得到保障。

There are also some other accessories. In fact, my personal suggestion is that no matter what accessories are, either use the anti disassembly screw or use the rivet screw. Minimize the use of self tapping screws. In this way, the strength and service life can be guaranteed.

防護欄是保障人生命安.全的，起碼的強度都保障不了的話，那還叫什么護欄，螺絲的選用在整個鋅鋼陽臺護欄的配件中是重要的。

Fence is to protect the safety of life. Safety, at least the strength can not protect the words, it is also called what guardrail, screw selection in the whole zinc steel balcony guardrail accessories is important.

有關濟南鐵藝護欄選用防盜螺絲的要點的相關內容到此就講解完了，希望鐵藝護欄廠家介紹的這些知識點可以對大家有所幫助，想了解更多詳情可以多多關注http://m.coagfreight.com網站動態。

Jinan Tieyi guardrail on the selection of anti-theft screw points related to the content of the end, I hope that Tieyi guardrail manufacturers to introduce these knowledge points can help you, want to know more details can be a lot of attention http://m.coagfreight.com Website news.