輕鋼結構作為廠家在建廠時喜歡的材料，其性能范圍很廣，用鋼結構設計的建筑熱工性能非常好，具有自然采光和通風效果。還不錯，其實主要和鋼結構平臺結構的結構分類和搭建是分不開的，那么下面小編就來給大家介紹一下這方面的知識。

Light steel structure, as a favorite material for the manufacturer when building the plant, has a wide range of performance. The building designed with steel structure has very good thermal performance and has natural lighting and ventilation effects. Not bad. In fact, it is inseparable from the structural classification and construction of steel structure platform structure. The following will introduce this knowledge to you.

濟南輕型鋼結構工作平臺結構的組成分類

Composition and classification of Jinan light steel structure working platform structure

1、組成：平臺結構通常由木板組成，平臺結構通常由木板、主次梁、柱、柱間支撐以及梯子、欄桿、主次梁、柱、柱間支撐，以及梯子和欄桿。

1. Composition: the platform structure is usually composed of wood plates. The platform structure is usually composed of wood plates, primary and secondary beams, columns, supports between columns, ladders, railings, primary and secondary beams, columns, supports between columns, and ladders and railings.

2、分類：按使用要求可分為室內和室內平臺、靜載和動載平臺、生產輔助平臺、中重型作業平臺。根據支架加工方式的不同，平臺結構還可以分為：

2. Classification: according to the use requirements, it can be divided into indoor and indoor platforms, static and dynamic load platforms, production auxiliary platforms and medium and heavy work platforms. The platform structure can also be divided into:

大型設備支持的平臺。

Platforms supported by large devices.

一側支撐在廠房立柱或建筑墻體上，另一側設置有獨立立柱的平臺。

One side is supported on the plant column or building wall, and the other side is provided with a platform with independent columns.

平臺直接放置在植物立柱的三腳架或牛腿上，通常用作安全通道或簡單的中型操作平臺。

The platform is directly placed on the tripod or bracket of the plant column, and is usually used as a safe passage or a simple medium-sized operating platform.

都是獨立的平臺。對于動載荷較大或設備較重的平臺，應與車間立柱分開設計，直接支撐在獨立立柱上。

Are independent platforms. The platform with large dynamic load or heavy equipment shall be designed separately from the workshop column and directly supported on an independent column.

濟南輕型鋼結構平臺結構施工

Construction of Jinan light steel structure platform structure

要明確原結構布置，選擇合理的鋼結構與原結構的連接位置和連接形式，避免鋼結構受力對原結構的破壞。

The layout of the original structure shall be defined, and the reasonable connection position and connection form between the steel structure and the original structure shall be selected to avoid the damage of the original structure caused by the stress of the steel structure.

鋼結構主次鋼梁的布置應結合閣樓的施工、裝修、安裝設計，避免或減少裝修安裝過程中對鋼結構的二次破壞。

The layout of the primary and secondary steel beams of the steel structure shall be combined with the construction, decoration and installation design of the attic to avoid or reduce the secondary damage to the steel structure during the decoration and installation process.

鋼結構布局的受力要清晰，傳力路線要清晰簡潔。由于鋼結構本身受力和振動明顯，需要準確分析計算，嚴格控制結構變形和振動頻率，保證結構的視覺美觀，消除結構與人類活動的共振，避免共振現象引起的結構剪切疲勞破壞，同時還能保證使用過程中的舒適度。

The stress of steel structure layout shall be clear, and the force transmission route shall be clear and concise. Due to the obvious stress and vibration of the steel structure, it is necessary to accurately analyze and calculate, strictly control the structural deformation and vibration frequency, ensure the visual beauty of the structure, eliminate the resonance between the structure and human activities, avoid the structural shear fatigue damage caused by the resonance phenomenon, and ensure the comfort in the use process.

槽鋼固定前，槽鋼靠墻的一面應涂防銹漆，但其他部位應等焊接完成后再涂漆，否則會影響焊接工作。

Before fixing the channel steel, the side of the channel steel against the wall shall be painted with anti rust paint, but other parts shall be painted after welding, otherwise the welding work will be affected.

工字鋼和槽鋼必須是同一規格，必須選擇“全焊”。主龍骨應為整鋼，嚴禁中間焊接。

I-beam and channel steel must be of the same specification, and "full welding" must be selected. The main keel shall be made of whole steel, and intermediate welding is strictly prohibited.

輕型鋼結構平臺結構組成分類和搭建相關內容講解完畢，您可以關注我們的網站m.coagfreight.com來了解更多問題更多要點。

After the explanation of the structure classification and construction of light steel structure platform, you can follow our website www.jnghbxg Com to learn more questions and points.